Yale SmartHome Alarm series Especificaciones Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
10
About your alarm system (default settings)
To set up more telephone numbers (maximum
3 in total), please see Chapter 5, Tel. Settings.
i
You can record a custom address
message that will be playback before the
event message. Please see chapter 5, Tel.
Settings
i
To change, please see Chapter 5, Adv.
Settings, Alarm Length.
i
To change the exit and entry timer, see Chapter
5, Adv. Settings.
To change the property of individual sensor (i.e.
Burglar attribute where the individual sensor will
instantly alarm when triggered), see Chapter 5,
Devices, Edit Devices.
Home arming is disabled by default. If you need
Home arming function, see Chapter 5, Home-
arm set.
i
All accessories were pre-set to
“entry” attributes.
When the system is first armed, user will have 30
seconds to exit the building. System will ignore any
sensors triggering in this duration.
If the system is already armed, triggering any
sensors will cause an entry countdown to begin.
When the alarm is triggered, the
system will dial out to alert the
owner.
When the alarm alerts you via
telephone, it will playback the
address message: “Yale Alarm
System” follow by the specific
event message (i.e. burglar).
Siren length is set to 3 minutes.
You can prevent arming when door contact is
opened. Please see Chapter 5, Adv. Settings,
DC Open/close.
i
As default, it is possible to arm
the system with “open” Door
contact (i.e. windows open).
When using a keyfob, you will
need to trigger the entry timer
(triggering a sensor) before you
can disarm the system with the
keyfob.
To change and allow disarming the system
(using keyfob) prior to you entering the building,
Please see Chapter 5, Adv. Settings, KF Entry.
i
Jamming and interference
detection disabled as default.
If Jamming and interference is of concern,
please see Chapter 5, Adv. Settings, Jamming
Det for option.
i
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comentarios a estos manuales

Sin comentarios